Piston set (4 items) for FORD Duratec 2.0 (87,50mm, 10.4:1)
Complete Piston set with Pins, locks and NPR rings
Complete Supertech Piston set P4-DU875-N2
Pistons in round skirt design. Slipper style discontinued!
Complete Supertech Piston set with Pins, locks and NPR rings
Make:ACURA
Engine:B16A DOHC VTEC
Piston set including:
4x Pistons P4-H815-N2R,
4x Piston ring GNH8150, Pins and locks
Parameter
Over Size: +0,50mm
Bore: 81,50mm
Hub: 77,4mm
Comp Ratio: 9.9:1
Pin Diam: 21mm (.827")
Rod Length: 134mm (5.290")
Comp Height: 1.181" (30,00mm)
Volume CCs: -2,5ccm
Head CCs: 42,7ccm
Skirt style: X
Weight: 235 g
Pin weight: 74 g
Ring P/N: GNH8150
Fits: Turbo / Nitro
Supertech applies over 40 years of experience in designing and manufacturing high performance racing pistons. Each piston is designed utilizing the latest in CAD software and finite element analysis (FEA) and manufactured from enhanced 4032 alloy. This material features low thermal expansion, excellent wear resistance and a higher thermal conductivity. All of our pistons are created using a 2 or 3 step forging process (depending on the application) which yields the finest structural grain orientation and the strongest piston possible.
Supertech pistons are manufactured in Argentina with technology transferred from European manufacturers. All of the pistons are manufactured to ensure the highest durability while recognizing the utmost performance improvements. Supertech pistons are manufactured from extruded high silicon, enhanced 4032 alloy (with additional Cu, Ni & Mg) that has low thermal expansion and features excellent wear resistance. Additionally, the inclusion of enhanced 4032 alloy offers a much higher thermal conductivity. Using this alloy our Supertech pistons have withstood up to 42psi of turbo boost with alcohol, without any problems. Depending on the type of piston Supertech has either a 2 or 3 step forging process that yields a fine structural grain orienting the fibers in the same direction of the stress. Combine this with several heat treatments and the pistons feature an evenly distributed hardness and extremely high tensile strength. From there each Supertech piston goes through several machining steps specifically designed to ensure dimensional precision, perpendicularity and flatness of the ring grooves.
All of Supertech pistons feature reduction grooves, honed and reamed pin bores for the most precise fit, while our wrist pins are constructed of cold extruded chrome moly steel for high strength to be used with wire clip locks.
Piston set including:
4x Pistons P4-H815-N2R,
4x Piston ring GNH8150, Pins and locks
Parameter
Over Size: +0,50mm
Bore: 81,50mm
Hub: 77,4mm
Comp Ratio: 9.0:1
Pin Diam: 21mm (.827")
Rod Length: 134mm (5.290")
Comp Height: 1.181" (30,00mm)
Volume CCs: -2,5ccm
Head CCs: 42,7ccm
Skirt style: X
Weight: 235 g
Pin weight: 74 g
Ring P/N: GNH8150
Fits: Turbo / Nitro
Supertech applies over 40 years of experience in designing and manufacturing high performance racing pistons. Each piston is designed utilizing the latest in CAD software and finite element analysis (FEA) and manufactured from enhanced 4032 alloy. This material features low thermal expansion, excellent wear resistance and a higher thermal conductivity. All of our pistons are created using a 2 or 3 step forging process (depending on the application) which yields the finest structural grain orientation and the strongest piston possible.
Supertech pistons are manufactured in Argentina with technology transferred from European manufacturers. All of the pistons are manufactured to ensure the highest durability while recognizing the utmost performance improvements. Supertech pistons are manufactured from extruded high silicon, enhanced 4032 alloy (with additional Cu, Ni & Mg) that has low thermal expansion and features excellent wear resistance. Additionally, the inclusion of enhanced 4032 alloy offers a much higher thermal conductivity. Using this alloy our Supertech pistons have withstood up to 42psi of turbo boost with alcohol, without any problems. Depending on the type of piston Supertech has either a 2 or 3 step forging process that yields a fine structural grain orienting the fibers in the same direction of the stress. Combine this with several heat treatments and the pistons feature an evenly distributed hardness and extremely high tensile strength. From there each Supertech piston goes through several machining steps specifically designed to ensure dimensional precision, perpendicularity and flatness of the ring grooves.
All of Supertech pistons feature reduction grooves, honed and reamed pin bores for the most precise fit, while our wrist pins are constructed of cold extruded chrome moly steel for high strength to be used with wire clip locks.
