CANchecked MFD28 - 2.8" Display VW Corrado Facelift RHD
Displays up to 50 engine Values
with vehicle-specific bracket for ventilation grille for right hand drive models
With the CANchecked displays you have all relevant engine values in view.
CANchecked has launched a new 2.8-inch display generation with a capacitive touch on the market. The display shows up to 50 values and is suitable for all freely programmable control units with CAN bus and many with serial interface. In addition, it has an 8GB SD card for logging while driving. All of the 10 display pages can be customized by the customer with widgets.
VW Corrado Facelift RHD installation frame for the right ventilation nozzle above the radio shaft.
Key Features:
- 2.8 inch capacitive touch display
- VW Corrado Facelift installation frame for the right ventilation nozzle above the radio shaft
- 8GB SD Card Memory
- Up to 10 freely configurable display pages
- Connection via CAN bus and serial interface
- 4 analog inputs for 0 - 5V sensors (for example oil pressure, fuel pressure, exhaust temperature (with adapter) and boost pressure)
- Shift Light (optional)
- Performance Meter (measures for example the time from 100-200 km/h)
- Individual minimum and maximum warning values
- Popup function when values exceed or fall below
- Screen brightness adjustable
Views:
- 10 pages to configure freely- Up to 17 widgets per page
- 10 different widgets (digital number, bar, speed, single pointer, log, Tableswitch, picture (from SD card), number, circle display, Haldex)
- Widgets via Drag'n'Drop movable and resizable
- Depending on the widgets color adjustment possible
As an alternative, the online configurator is available. Here, the views can be created in advance and then copied to the SD card via the export function.
Supported Values: Many customers always ask, "What values can I query from my ECU?". The answer: " ALL " The ECU manufacturers themselves determine which values are sent via the interface and document them accordingly. A total of up to 50 sensors can be interrogated with the display if the manufacturer supports it. Supported ECUs:
Generally, all ECUs with a documented CAN bus or a serial interface are supported. The latter is only possible with optional serial adapters. Most manufacturers deliver a "dbc" file, which is then converted into a .tri file for the display. This can also be done by the customer himself via the DBC converter via the manufacturer website.
Performance Meter:
Time measurement directly integrated in the display. 0-100; 0-200; 150-200... everything is possible. The time is measured via the speed signal from the control unit, optionally combined with a 10Hz GPS module.
Logging:
There are four different logging types available:
1. USB: logs live all sensor data via USB hub
2. SD card: all sensor data is logged on the SD card
3. Debug: all CAN bus data is logged via USB.
4. sDbg: all Can Bus data is stored on the SD card (CAN Bus Logger)
To read the log, go to logviewer. Just load logfile and use the intuitive interface.
Supported ECUs:
In general, all ECUs are supported which have a documented CAN bus or a serial interface. The latter is only possible with optional serial adapters. Most manufacturers deliver a "dbc" file, which is then converted into a .tri file for the display. This can also be done by the customer himself via the DBC converter via the CANchecked manufacturer website.
Optional Accessories:
- Haldex license
- Shift light
- Serial adapter (VEMS + Ecumaster without CAN)
- Boost Control
The following standalone engine units have already been implemented:
- trijekt (Premium, Bee, trigifant)
- Megasquirt 2 und 3
- k-data KDFI
- UMC1/UMC2
- EFIgnition
- Microsquirt
- EcuMaster EMU (classic with Can-Bus adapter: EMU Black)
- AIM generic protocol
- LinkECU
- Haltech v2
- MME ECU481 with Can Bus
- SCS Delta GDI4 and Delta
- VAG (Audi / VW / Seat)
- Van kronenburg KMS MD35 (MP25 with CAN-Bus adapter)
- VEMS with serial adapter
If your ECU is not listed, please contact us
Haldex
The 2.8 "display has the ability to control the VAG 4Motion Haldex control unit (VAG Gen 1 PQ34 platform). The communication occurs via CAN bus, so no conversion of the Haldex is necessary. The controller is activated by a license.
Fits for Modell year:
VW Corrado Facelift RHD 1992 - 1995
What's in the box:
- CANchecked 2.8 inch display
- VW Corrado Facelift RHD installation frame for the right ventilation nozzle above the radio shaft
- Vehicle specific bracket for the vent pod
- Cable set
- 8 GB micro SD card
- Micro SD Card Adpater
- Quickstart Guide
Installation manuals can be found on CANchecked website
The display is configured via the website or via the Display Setup Software (found on the CANchecked website under the menu item DSS). The dbc-converter for the Can Bus protocol and the online configurator for the widgets, whereby this can also be set via the touch display.
The temperature range of the display is -10°C to 70°C.
12V are required as a voltage supply, 5V or 24V are optional possible.
The display is also available with vehicle-specific brackets for the inside car vents. These can be found in our online shop. Further covers on request.
